图片经供参考,以实物为准

可插拔终端模块 / FGDC-T-250A-V-0.0M

  • 价格 起订量
  • ¥ 0 1+
  • ¥ 0 10+
  • ¥ 0 100+
  • ¥ 0 500+
  • ¥ 0 1000+
  • 型号: FGDC-T-250A-V-0.0M
  • 厂商: DEGSON(高正/高松)
  • 类别: 可插拔终端模块
  • 封装:
  • 描述: Charging device socket outlet for charging electric vehicles (EVs) with direct current (DC), compatible with the national standard DC vehicle charging device plug for installation in EVs
  • 库存地点: 内地
  • 库存: 暂无库存
  • 货期: 1 - 3 个工作日
  个
总额¥ 0.00000

付款方式

  • 支付宝
  • 微信支付
  • 银联支付
  • 银行支付

包装流程

  • 1.产品检查
  • 2.塑料封装
  • 3.防静电保护
  • 4.包装入箱
  • 5.贴条形码
  • 6.出库运输
产品属性 产品问答
  • 属性参考值
  • Mounting hole diameter:7.00 mm (ø)
  • Wire length:0m
  • Ambient temperature (operation):- 30 °C ~ 50 °C
  • Ambient temperature (storage/transportation):- 40 °C ~ 80 °C
  • Maximum altitude:5000m(Above sea level )
  • IP class:IP55(coupling)
  • Maximum charge power:250KW
  • Power pin quantity:9 (DC+,DC-,PE,A+,A-,S+,S-,CCS1,CCS2)
  • Rated current of high-power contacts:250
  • Power contact rated voltage:750
  • Quantity of signal contacts:4(S+,S-,CCS1,CCS2)
  • Signal contact rated current:2
  • Signal contact rated voltage:30
  • Signal transmission type:Pulse width adjustment
  • Connection method precautions:Crimp connection, cannot be disconnected
  • Temperature measurement:2x Pt 1000 (DIN EN 60751)
  • Insert / pull out cycle:10000
  • Pullout force:< 140N
  • Available installation location:Installation in front of the board
  • Limit of the installation location:Only allow 0 to 90 degrees frontal tilt
  • Shell color:black
  • Customization basis:Provided according to customer requirements
  • Contact surface material:Ag
  • Marking material:Plastic
  • Lock type:Secured by locking device after insertion
  • Recommended measured current:1 mA (1 V at 0°C )
  • Recommendation to measure tolerance on current sensors:±1K
  • Temperature coefficient (TCR):3850 ppm/K
  • Shutdown temperature:90 °C Equivalent to Pt 1000 value 1346.5 Ω
  • REACH:conform
  • China RoHS:conform
  • Cable composition:2 x 80 mm² + 1 x 25 mm² + 2 × 4 mm² + 3× 0.75 mm²
  • 深度:84.2mm
  • Temperature range:_50 °C ... 150 °C
  • Hole diameter:72 mm x 72 mm
  • Insertion force:<140N
  • 标准:DIN EN 60751
  • 相位:3

采购询价